Channel Track Manufacturing
Channel Track Manufacturing, 11750 Clay Road, Houston, Texas 77043 · 713.864.2551 · www.channel-track.com. Roll-formed steel channel sections, instrument stands, supports and racks.
Call 1-713-880-4228 or email sales@BMTGulfCoast.com for pricing and availability.
MaxiStrut Channel Framing Strut System
Download the MaxiStrut Channel Framing Strut System PDF line card
CHANNEL TRACK MANUFACTURING
ROLL-FORMED STEEL CHANNEL SECTIONS
MAXISTRUT Channel Framing Strut System
CHANNEL TRACK MANUFACTURING
713.864.2551
TRACK.COM
Channel Nuts
Channel Nuts
Standard finish is Zinc Electroplate. See page one for a listing of product finishes and materials.
CNN Channel Nut No Spring
CNS Channel Nut Short Spring
CNR Channel Nut Regular Spring
For all channel sizes except as noted
For 13/16" & 1" channel
For 1-3/8" & 1-5/8" channel
TH
TH
TH
T
T
T
| CatalogNumber | TH | T in. mm | |
|---|---|---|---|
| CNN20025EG | 1/4”–20 | 0.25 | 6.3 |
| CNN30031EG | 5/16"–18 | 0.37 | 9.4 |
| CNN30037EG | 3/8"–16 | 0.37 | 9.4 |
| CNN30050EG | 1/2"–13 | 0.37 | 9.4 |
| *CNN40050EG | 1/2"–13 | 0.50 | 12.7 |
| CNN30062EG | 5/8"–11 | 0.37 | 9.4 |
| *CNN40062EG | 5/8"–11 | 0.50 | 12.7 |
| CNN30075EG | 3/4"–10 | 0.37 | 9.4 |
| *CNN40075EG | 3/4"–10 | 0.50 | 12.7 |
| *CNN40087EG | 7/8"–9 | 0.50 | 12.7 |
| CatalogNumber TH | T in. mm | ||
|---|---|---|---|
| CNS20025EG 1/4”– | 20 0.25 | 6.3 | |
| CNS20031EG 5/16"– | 18 0.25 | 6.3 | |
| CNS30031EG 5/16"– | 18 0.37 | 9.4 | |
| CNS20037EG 3/8"– | 16 0.25 | 6.3 | |
| CNS30037EG 3/8"– | 16 0.37 | 9.4 | |
| CNS30050EG 1/2"– | 13 0.37 | 9.4 | |
| CNS30062EG 5/8"– | 11 0.37 | 9.4 |
| Cat | alogNumber | TH | T in. mm | |
|---|---|---|---|---|
| CN | R20025EG | 1/4”–20 | 0.25 | 6.3 |
| CN | R20031EG 5 | /16"–18 | 0.25 | 6.3 |
| CN | R30031EG 5 | /16"–18 | 0.37 | 9.4 |
| CN | R20037EG | 3/8"–16 | 0.25 | 6.3 |
| CN | R30037EG | 3/8"–16 | 0.37 | 9.4 |
| CN | R30050EG | 1/2"–13 | 0.37 | 9.4 |
| CN | R40050EG | 1/2"–13 | 0.50 | 12.7 |
| CN | R40062EG | 5/8"–11 | 0.50 | 12.7 |
| CN | R40075EG | 3/4"–10 | 0.50 | 12.7 |
| CNR40087EG | 7/8"–9 | 0.50 | 12.7 |
*Cannot be used with 13/16" & 1" channel
CNL Channel Nut Long Spring
CNT Channel Nut Top Spring
For 2-7/16" & 3-1/4" channel
For all channel sizes except as noted
TH
T
TH
T
| CatalogNumber T | T H in. mm | ||
|---|---|---|---|
| CNT20025EG 1/4” | –20 0.25 | 6.3 | |
| CNT30037EG 3/8" | –16 0.37 | 9.4 | |
| CNT30050EG 1/2" | –13 0.37 | 9.4 | |
| *CNT40050EG 1/2" | –13 0.50 | 12.7 |
| CatalogNumber | TH | T in. mm | |
|---|---|---|---|
| CNL20025EG | 1/4”–20 | 0.25 | 6.3 |
| CNL30037EG | 3/8"–16 | 0.37 | 9.4 |
| CNL40050EG | 1/2"–13 | 0.50 | 12.7 |
CHANNEL TRACK MANUFACTURING
713.864.2551
TRACK.COM
Strut Clamps
Strut Clamps
Standard finish is Zinc Electroplate. See page one for a listing of product finishes and materials.
SCR Rigid Strut Clamp
| Catalog Number | Pipe Size Inch Metric | O.D. in. mm | Design Load lbs kN | |||
|---|---|---|---|---|---|---|
| SCR 0012EG | 1/8 | 3 | 0.405 | 10.3 | 400 | 1.78 |
| SCR 0025EG | 1/4 | 6 | 0.540 | 13.7 | 400 | 1.78 |
| SCR 0037EG | 3/8 | 10 | 0.675 | 17.1 | 400 | 1.78 |
| SCR 0050EG | 1/2 | 15 | 0.840 | 21.3 | 400 | 1.78 |
| SCR 0075EG | 3/4 | 20 | 1.050 | 26.7 | 600 | 2.67 |
| SCR 0100EG | 1 | 25 | 1.315 | 33.4 | 600 | 2.67 |
| SCR 0125EG | 1-1/4 | 32 | 1.660 | 42.2 | 600 | 2.67 |
| SCR 0150EG | 1-1/2 | 40 | 1.900 | 48.3 | 800 | 3.56 |
| SCR 0200EG | 2 | 50 | 2.375 | 60.3 | 800 | 3.56 |
| SCR 0250EG | 2-1/2 | 65 | 2.875 | 73.0 | 800 | 3.56 |
| SCR 0300EG | 3 | 80 | 3.500 | 88.9 | 800 | 3.56 |
| SCR 0350EG | 3-1/2 | 90 | 4.000 | 101.6 | 1000 | 4.45 |
| SCR 0400EG | 4 | 100 | 4.500 | 114.3 | 1000 | 4.45 |
| SCR 0500EG | 5 | 125 | 5.562 | 141.3 | 1000 | 4.45 |
| SCR 0600EG | 6 | 150 | 6.625 | 168.3 | 1000 | 4.45 |
| SCR 0800EG | 8 | 200 | 8.625 | 219.1 | 1000 | 4.45 |
| SCR 1000EG | 10 | 250 | 10.750 | 273.1 | 1000 | 4.45 |
| SCR 1200EG | 12 | 300 | 12.750 | 323.9 | 1000 | 4.45 |
DESIGN LOAD
| Catalog Number | Clamp Inch | Size * Metric | O.D. in. mm | Design Load lbs kN | ||
|---|---|---|---|---|---|---|
| SCU 0050EG | 1/2 | 15 | 0.773 | 19.6 | 400 | 1.78 |
| SCU 0075EG | 3/4 | 20 | 0.986 | 25.0 | 600 | 2.67 |
| SCU 0100EG | 1 | 25 | 1.239 | 31.5 | 600 | 2.67 |
| SCU 0125EG | 1-1/4 | 32 | 1.585 | 40.3 | 600 | 2.67 |
| SCU 0150EG | 1-1/2 | 40 | 1.820 | 45.7 | 800 | 3.56 |
| SCU 0200EG | 2 | 50 | 2.286 | 58.1 | 800 | 3.56 |
CHANNEL TRACK MANUFACTURING
713.864.2551
TRACK.COM
Strut Clamps (con’t)
Strut Clamps
Standard finish is Zinc Electroplate. See page one for a listing of product finishes and materials.
CCT Cushioned Tubing Strut Clamp
| Catalog Number | Tubing O.D. in. in. mm (Fractions) (Decimal) | ||
|---|---|---|---|
| CCT 0025YC | 1/4 | 0.250 | 6.4 |
| CCT 0037YC | 3/8 | 0.375 | 9.5 |
| CCT 0050YC | 1/2 | 0.500 | 12.7 |
| CCT 0062YC | 5/8 | 0.625 | 15.9 |
| CCT 0075YC | 3/4 | 0.750 | 19.0 |
| CCT 0087YC | 7/8 | 0.875 | 22.3 |
| CCT 0100YC | 1 | 1.000 | 25.4 |
| CCT 0112YC | 1-1/8 | 1.125 | 28.6 |
| CCT 0125YC | 1-1/4 | 1.250 | 31.8 |
| CCT 0137YC | 1-3/8 | 1.375 | 34.9 |
| CCT 0150YC | 1-1/2 | 1.500 | 38.1 |
| CCT 0162YC | 1-5/8 | 1.625 | 41.3 |
| CCT 0175YC | 1-3/4 | 1.750 | 44.5 |
| CCT 0187YC | 1-7/8 | 1.875 | 47.6 |
| CCT 0200YC | 2 | 2.000 | 50.8 |
| CCT 0212YC | 2-1/8 | 2.125 | 54.0 |
| CCT 0225YC | 2-1/4 | 2.250 | 57.2 |
| CCT 0250YC | 2-1/2 | 2.500 | 63.5 |
| CCT 0262YC | 2-5/8 | 2.625 | 66.7 |
| CCT 0287YC | 2-7/8 | 2.875 | 73.0 |
| CCT 0312YC | 3-1/8 | 3.125 | 79.4 |
| CCT 0362YC | 3-5/8 | 3.625 | 92.1 |
| CCT 0412YC | 4-1/8 | 4.125 | 104.8 |
DESIGN LOAD
| CCP | Size O.D. | |||||
|---|---|---|---|---|---|---|
| Pipe Size O.D. Cushioned Pipe Strut Clamp Catalog Number Inch Metric in. mm CCP 0037YC 3/8 10 0.675 17.1 DESIGN LOAD CCP 0050YC 1/2 15 0.840 21.3 CCP 0075YC 3/4 20 1.050 26.7 CCP 0100YC 1 25 1.315 33.4 CCP 0125YC 1-1/4 32 1.660 42.2 CCP 0150YC 1-1/2 40 1.900 48.3 CCP 0200YC 2 50 2.375 60.3 CCP 0250YC 2-1/2 65 2.875 73.0 CCP 0300YC 3 80 3.500 88.9 CCP 0350YC 3-1/2 90 4.000 101.6 CCP 0400YC 4 100 4.500 114.3 CCP 0500YC 5 125 5.562 141.3 | Cushioned Pipe Strut Clamp | Catalog Number | Pipe | Size | O.D. | |
| Inch | Metric | in. | mm | |||
| CCP 0037YC | 3/8 | 10 | 0.675 | 17.1 | ||
| CCP 0050YC | 1/2 | 15 | 0.840 | 21.3 | ||
| CCP 0075YC | 3/4 | 20 | 1.050 | 26.7 | ||
| CCP 0100YC | 1 | 25 | 1.315 | 33.4 | ||
| CCP 0125YC | 1-1/4 | 32 | 1.660 | 42.2 | ||
| CCP 0150YC | 1-1/2 | 40 | 1.900 | 48.3 | ||
| CCP 0200YC | 2 | 50 | 2.375 | 60.3 | ||
| CCP 0250YC | 2-1/2 | 65 | 2.875 | 73.0 | ||
| CCP 0300YC | 3 | 80 | 3.500 | 88.9 | ||
| CCP 0350YC | 3-1/2 | 90 | 4.000 | 101.6 | ||
| CCP 0400YC | 4 | 100 | 4.500 | 114.3 | ||
| CCP 0500YC | 5 | 125 | 5.562 | 141.3 |
CHANNEL TRACK MANUFACTURING
713.864.2551
TRACK.COM
CHANNEL TRACK MANUFACTURING
713.864.2551
TRACK.COM
Instrument Stands, Supports, Condensate Pots and Air Headers
Download the Instrument Stands, Supports, Condensate Pots and Air Headers PDF line card
CHANNEL TRACK MANUFACTURING
CHANNEL TRACK MANUFACTURING
INSTRUMENT STANDS
CONDENSATE POTS
3" x 5" WELD CAP 4" x 14" SPUN
FM-S52-HG-20
WM-RAE-HG-20
FM-D52-HG-20
3" x 11" WELD CAP 6" x 4" FLAT PLATE
- SIZES: 2", 3", 4", 6", 8" • MATERIALS: CARBON STEEL & STAINLESS STEEL • 100% HYDROSTATICALLY TESTED • SCH. 40, 80, 160, XXH
CMX-CPLG-HG-2*
UBX-RAEP-HG-2
- 2" SCH. 40 PIPE UBX-RAEH-HG-2
- ALUMINUM, GALVANIZED & STAINLESS STEEL • SINGLE, DOUBLE, CANTILEVER, TRIPLE
CHANNEL TRACK MANUFACTURING
CHANNEL TRACK MANUFACTURING
INSTRUMENT SUPPORTS INSTRUMENT AIR HEADERS
MANIFOLDS FOR AIR, LIQUID & GAS SYSTEMS
PUNCHED PUNCHED ANGLE CHANNEL 20'L 20'L
PUNCHED FLAT BAR
10'L • PERFORATED ANGLE, CHANNEL & FLAT BAR
ALUMINUM, BRASS, STAINLESS STEEL
- ALUMINUM, FIBERGLASS, GALVANIZED & STAINLESS STEEL
- ONE (1) INCH TAPPED ONE OR BOTH SIDES
- 1", 2", 4", 6"WIDTHS
2" W x 2" H 2" W x 1" H 2" W
316 STAINLESS STEEL CLAMPS & FASTENERS
- TWO (2) INCH TAPPED BOTH SIDES - CUT-AWAY
RACEWAY 7/8" DEEP, 16' LONG, 16 GA. WIDTHS: 1", 1.5", 2.5", 3.375", 3.75"
PUNCHED CHANNEL 1" & 2" DEEP, 20' LONG, 12 & 14 GA. WIDTHS: 1", 1.5", 2", 4", 6", 8"
- TWO (2) INCH TAPPED BOTH SIDES
ALUMINUM, GALVANIZED STEEL, STAINLESS STEEL, FIBERGLASS
- AVAILABLE IN LENGTHS UP TO 20’
* NUCLEAR QUALITY ASSURANCE PROGRAM ACTIVE
- TAP SPACING PER CUSTOMER SPECIFICATION
CHANNEL TRACK MANUFACTURING
316 S.S. CLAMPS FOR AIR & HYDRAULIC TUBING
DUPLEX CLAMP 1/4", 3/8", 1/2" O.D. SINGLE LINE 1/4" - 1-1/4" O.D. GANGCLAMP & BACKPLATE 1/4", 3/8", 1/2" O.D.
YOKE CLAMP 1/4", 3/8", 1/2", 3/4" O.D.
MAXISTRUT Channel Framing Strut System
ALUMINUM, STAINLESS STEEL, GALVANIZED STEEL 1-5/8" WIDE STRUT
- FLAT PLATE FITTINGS • 90° ANGLE FITTINGS • ANGULAR FITTINGS • "Z" SHAPE FITTINGS • "U" SHAPE FITTINGS • WING SHAPE FITTINGS
- POST BASES • BRACKETS • PIPE CLAMPS • BEAM CLAMPS • SPRING NUTS
* Nuclear Quality Assurance Program Active
P.O. BOX 70067 HOUSTON, TX. 77270-0067
(713) 880-4228 FAX (713) 868-4550
CHANNEL TRACK MANUFACTURING
• LADDER TRAY
ALUMINUM, STAINLESS, GALVANIZED ALL NEMA CLASSES
6" - 36" WIDTHS 4", 6", 7", DEPTH 12' & 24' LENGTHS FITTINGS: 12", 24", 36" RADII
I-BEAM RUNG
• CHANNEL TRAY
ALUMINUM, STAINLESS, GALVANIZED
3", 4" & 6" WIDTHS 1-1/4", 1-3/4", DEPTH 10', 12' & 24' LENGTHS FITTINGS: 12", 24", 36" RADII
4"
• TROUGH TRAY
ALUMINUM, STAINLESS, GALVANIZED ALL NEMA CLASSES
6"-36" WIDTHS 4", 6", 7", DEPTH 12' & 24' LENGTHS FITTINGS: 12", 24", 36" RADII
6"
I-BEAM & CHANNEL SIDE RAILS
*NUCLEAR QUALITY ASSURANCE PROGRAM ACTIVE
MMRS Multi Mod Rack System
Download the MMRS Multi Mod Rack System PDF line card
MMRS
MULTI MOD RACK SYSTEM
MMRS
MULTI MOD RACK SYSTEM
ROOF DOUBLE VCM LEFT SIDE
ROOF (ADD BAY R) BACK SIDE
Product Details and Benefits
MMRS was developed to fulfill an increasing need for a modular field erectable rack system that requires minimal labor skill sets to assemble and no field welding. MMRS provides for mounting of various equipment types on front and/or back side of the rack. A system can be configured with or without roofs.
ROOF FRONT SIDE
MMRS has been independently “Third Party” PE reviewed for compliance to the wind load requirements of ASCE 7-22 including wind load in CFR 193 Part 193.2067 for LNG facilities.
BHCM ENCLOSURE MOUNT
VCM RIGHT SIDE
FRONT SIDE
- System can be configured with any mixture of 24” / 36” / 48” bays. (Ex: 4 Bay 36” / 24” / 48” / 48”)
BHCM ENCLOSURE MOUNT
BACK SIDE
- Can be flat packed / tagged and ship to site.
HCM BACK SIDE
- Field erectable with minimal labor skill sets.
HCM FRONT SIDE
- No field welding required.
- Each Bay can be provisioned with BHCM’s on front and/or back sides independent of each other for equipment mounting. BHCM’s are slotted to provide infinite adjustability throughout the vertical column length for all equipment mounting dimensions. BHCM’s are fitted with 1 5/8” x 1 5/8” strut which provides infinite horizontal equipment mounting dimensions.
Applications
Suitable for application in many industries including Oil & Gas, Industrial, Offshore, Power, Marine, Petrochemical and Chemical.
- Load bearing structural components are Carbon Steel 50ksi minimum. H.D.G.A.F. (Hot Dip Galvanize After Fabrication)
Ideal for Control Stations, Motor Starters, Junction Boxes, Circuit Breakers, Disconnects, Receptacles, Distribution and Transformers.
- Load bearing structural fasteners are B7 or equivalent 105ksi. with a Fluoropolymer coating. (IE: Trade Names Xylan / Fluorokote#1)
MAIN COMPONENTS
BC (Bay Column / Upright) 1
- Available in Standard and Extended heights.. • W-Beam is welded to the bottom Base Plate and the top Roof Mount. • W-Beam flange is perforated on both sides of web with 9/16” holes on 3” centers. • Single BC can be utilized as a stanchion to mount various types of transmitters / monitors and more. • Contact manufacturer for special height requirements.
BHCM (Bay Horizontal Cross-Member) 1,2
- Mount enclosures, panels and other items on 24”, 36” or 48” Bay widths.
- BHCM’s are slotted to provide infinite adjustability throughout the column length for all equipment mounting dimensions. • Strut is 1 5/8” x 1 5/8” bolted to BHCM providing for change out of damaged or material type if needed.
ADD-ONS / ACCESSORIES
HCM (Horizontal Cantilever Mount) 1,2
- Mount cable tray, conduit, pipe and other items in a flat horizontal position. • Available in 2” increments from 12” to 26”. • Back to Back strut provides for mounting on top and/or bottom.
VCM (Vertical Cantilever Mount) 1,2
- Mount cable tray, conduit, pipe and other items in a vertical position. • Available in 2” increments from 12” to 26”. • Double Combination strut provides for mounting on front side and/or back side of VCM.
TMK (Transformer Mount Kit) 1,2 • Bay widths 24/36/48 can be configured for 15kva, 30kva, 45kva or other sizes as required. • 15kva can be wall mounted using two BHCM’s. • Capable of 650 lb. load. Contact manufacturer for additional load requirements. • TMK adjustability provides for additional configurations to accommodate other foot mounted equipment.
TCS (Transformer Cover Shield) 1,2
- TCS is a light weight alternative of a full roof. • Bay widths 24/36/48 can be configured to shield 15kva, 30kva, 45kva or other equipment.
- TCS’s outward extension length are in three lengths to minimize protrusion into the work area. This allows for placement below head height.
RF (Roof - Single / Double) 1,2
- Roof configurations can be front, back or double front and back. • Multi Bay configurations use the “Add a Bay” Roofs.
- Underneath cross member purlins are perforated 13/32” dia. on 8” centers providing a mount for slotted strut or other mount types to facilitate lights, alarms, monitors, etc..
CCP (Column Connector Plate) 1,2
- CCP is required when a VCM is attached to a BC. • The requirement is to minimize the reaction torsion moment of the VCM being applied to the BC.
FOOTNOTES: 1. Components are H.D.G.A.F. 2. Required fastener kits included.
Manufacture’s Brochures
MMRS Data Sheets
Configurator Request Form MMRS Brochure Digital Download
MMRS
MULTI MOD RACK SYSTEM
11750 CLAY RD. HOUSTON, TEXAS 77043 USA
PH. 713-864-2551 www.Channel-Track.com